Kit Includes:
- 1 Threaded Tip
- 1 Lever
- 1 Pin
- 2 Screws
- 3 Springs
Tools Needed:
- Phillips Screwdriver or Drill
- Flat Screwdriver
- Hammer
- Small Punch
Directions:
STEP 1 Use a phillips screwdriver (or a drill with a phillips-head bit) to remove the 2 screws attaching the threaded tip to the inner pole.
STEP 2 Lightly tap the threaded tip with a flat screwdriver and pull the original threaded tip to remove it from the inner pole.
STEP 3 Place the replacement threaded tip in the inner pole. Lightly tap with a hammer, if needed, to align the screw holes.
STEP 4 Use the new phillips screws to secure the replacement tip to the pole.
STEP 5 Use a hammer and a small punch to gently push the pin from the lever mechanism.
STEP 6 Place the new lever into position.
STEP 7 Insert the replacement pin and lightly tap it into place with a hammer.
STEP 8 Use a flat screwdriver to push a new spring into place.